EcoModo: the DIY system

Invent is proud to present EcoModo, the first photovoltaic system totally “do it yourself” for private users.
Finally the photovoltaic system has become simple, cheap and quick, you will have FREE and immediately all the electricity you need during the day for housework, (cooking, washing, ironing etc.) avoiding also the future cost increases of the same.
EcoModo, combined with a heat pump, can help you to save on water heating.

Thanks to the innovative Module Invent Alterna QHP, Eco Modo is easy to install and you can connect it directly to the house without calling the electrician.

Technical features

  • .

  • Range

    EcoModo Mini / ECMK1 / 1 module

    EcoModo05

    EcoModo K2 / ECMK2 / 2 modules

    EcoModo04

    EcoModo K4 / ECMK4 / 4 modules

    EcoModo03

  • Installation

    You can install EcoModo wherever you want, the modularity of the system and easy mounting structures allow to place them in different parts of the house.

    Thanks to the aluminum brackets and quick connections, installation and electrical connection of EcoModo is suitable to everyone.

    1
    Position and fix the modules with practical aluminum brackets.

    2
    Connect the modules with the cable provided with easy plug and play connections.

    3
    Plug the cable into an electrical outlet of the house.

     

    EcoModo02

  • Certifications

    Invent photovoltaic modules are certified according to European standard IEC 61215 (Ed.2).
    The safety tests were performed according to IEC 61730 (protection class II).
    In the laboratory, the modules have passed all the tests showing high resistance to various types of stress.

    IWP0242
    EN 61215 (2005) – 10.17
    Hail resistance

    IWP0243
    EN 61215 (2005) – 10.16
    Mechanical load test

    IWP0244
    EN 61730-2 (2007) – MST 21
    Temperature test

    IWP0245
    EN 61215 (2005) – 10.11
    Temperature cycle test (50 and 200 cycles)

    IWP0246
    EN 61215 (2005) – 10.13
    Hot humid test

    IWP0247
    EN 61215 (2005) – 10.12
    Moisture and freeze test

    IWP0251
    IEC 61730-2: 2004 annexe 2,
    IEC 61730-2: 2004 annexe 20:12
    Fire resistance Test class C

    IWP0252
    IEC 61215/61646, EN 61730-1,
    EN 61730-2, IEC 61701
    Ammonia test

    IWP0247
    EN 61701 (2000)
    Salt spray test

     

  • .

  • Compact technology

    In the module Alterna QHP of EcoModo, all the technology is compacted into a single plank fixed in the back of the panel.

    In the panel there is the control and management board of the module with the alternating current output.

  • Independent modules

    Unlike standard systems, with an EcoModo system, each module is independent from each other: so if one were to have a problem even temporary (shadow, dirt, or failure), this will not cause a decline in the efficiency of the whole system but will limit its effect to only the affected module.

    IWP0248en

  • NanoClean treatment

    The modules comprised in EcoModo are treated with a special nanotechnological process to maintaining the cleanliness of the module among the time.

    The treatment gives the surfaces the permanent property of “thicken” the dirt or limestone favoring periodic cleaning.

    In the pictures you can see the difference in behavior of water and limestone on the surface treated with nanotechnology.

    EWP020-500x170en

Pstudio
Invent Srl
  • Via Alessandro Volta, 54 - 30020 Noventa di Piave - VE - Italy
  • +39.0421 307393
  • p.iva 04096150281 - R.E.A. n. ve-331840 - capitale sociale euro 500.000 interamente versato